The least you can do is to obfuscate the source code, for example, using Jscrambler ( Terms of service • Privacy policy • Editorial independence, Get unlimited access to books, videos, and. Tested with the lowest point of the enclosure 1,000 mm (39 in) below the surface of the water, or the highest point 150 mm (5.9 in) below the surface, whichever is deeper. No protection against contact and ingress of objects, Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part. The IPx9 specification details a freehand method for testing larger specimens that will not fit on a turntable (see table above). registered® trademarks of their respective holders. Protected against close-range high pressure, high-temperature spray downs. With the availability of portable devices, and the desire for outdoors exposure with active lifestyles, portable speakers have become popular with the rugged consumer market for those who enjoy outdoor recreation, extreme sports as well. If you have any commercial use of this fact in mind, it … - Selection from Cross-platform Desktop Application Development: Electron, Node, NW.js, and React [Book] In the US, the National Electrical Manufacturers Association defines NEMA enclosure types in NEMA standard number 250. b) is conducted (without shield) for 5 minutes minimum. Some manufacturers have produced IP rated smartphones,[10] aimed at consumers who are concerned about their handsets getting submerged in liquids or getting covered in dust. Water volume: 12.5 litres per minute Modules for the Renderer Process (Web Page): KeyboardInputEvent Object extends InputEvent, MouseInputEvent Object extends InputEvent, MouseWheelInputEvent Object extends MouseInputEvent, NewWindowWebContentsEvent Object extends Event, Technical Differences Between Electron and NW.js, Open the selected search result in a new tab. This table shows what each digit or part of the IP code represents. Pressure: 8–10 MPa (80–100 bar) at distance of 0.10–0.15 meters (3.9 in–5.9 in) Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or I'm looking to add a layer of protection to my client side code for a project I'm building. Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle of 15° from its normal position. © 2020, O’Reilly Media, Inc. All trademarks and registered trademarks appearing on are the property of their respective owners. Use of them does not imply any affiliation with or Test The js folder will be moved into a newly created directory, src: Take O’Reilly online learning with you and learn anywhere, anytime on your phone and tablet. Larger specimens are mounted in the intended position when being used, no turntable required, and are tested freehand for at least 3 minutes at a distance of 0.15–0.2 meters (5.9 in–7.9 in). Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect, utilizing either: a) an oscillating fixture, or b) A spray nozzle with a counterbalanced shield. Water temperature: 80 °C (176 °F), (All tests with the letter "K" are defined by ISO 20653 (replacing DIN 40050-9) and are not found in IEC 60529, except for IPx9 which is the same as the IP69K water test.). Latest News. Sync all your devices and never lose your place. Pressure: 1,000 kPa (150 psi) at distance of 3 meters (9.8 ft). Smaller specimens rotate slowly on a turntable, from 4 specific angles. Basic Electronics: Circuit: ^An electric circuit is like a pathway made of wires that electrons can flow through. A total of four positions are tested within two axes. Similarly, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. This type of software generally employs the above methods, in varying ways, to hide your source code. Water equivalent to 1 mm (0.039 in) rainfall per minute, Water equivalent to 3 mm (0.12 in) rainfall per minute. For example, a cellular phone rated at IP68 is "dust resistant" and can be "immersed in 1.5 meters of freshwater for up to 30 minutes". Powerful water jets with increased pressure. Using clang-format on C++ Code; Coding Style; Debugging on Windows; Debugging on macOS; Debugging with XCode; Technical Differences Between Electron and NW.js; Goma; Issues In Electron; Patches in Electron; Pull Requests; Developing Electron; Setting Up Symbol Server in Debugger; Source Code Directory Structure; Testing; V8 Development How can I obfuscate the client side source code of my ES6 / React / Redux / Electron project? Pressure: 30 kPa (4.4 psi) at distance of 3 meters (9.8 ft), Water volume: 100 liters per minute (0.37 impgal/s) reserved. Depth specified by the manufacturer, generally up to 3 meters (9.8 ft). This article summarizes a combination of IEC 60529 (also EN 60529) and other standards, such as ISO 20653. The second digit indicates the level of protection that the enclosure provides against harmful ingress of water. Copyright OpenJS Foundation and Electron contributors. Immersion, 1 meter (3 ft 3 in) or more depth. These individual tutorials expand on topics discussed in the guide above. No ingress of dust; complete protection against contact (dust-tight). The test depth and duration is expected to be greater than the requirements for IPx7, and other environmental effects may be added, such as temperature cycling before immersion. Most wires, slender screws, large ants etc. For the protection of personnel against access to hazardous parts with: For the protection of equipment specific to: The letter K is specified in DIN 40050-9, and not in IEC 60529. The test distance also increases to .175 m (0.15–0.2 m per section 14.2.9). Water projected in powerful jets (12.5 mm (0.49 in)) against the enclosure from any direction shall have no harmful effects. If you have any commercial use of this fact in mind, it is unlikely to suit you. Water volume: 0.07 liters per minute (0.00026 impgal/s) per hole. Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 meter (3 ft 3 in) of submersion). Standard for protection against intrusion of dust and water, Ingress protection for consumer electronics, ISO 20653:2013 Road Vehicles-Degrees of protection (IP code) Protection of electrical equipment against foreign objects, water and access, International Electrotechnical Commission, National Electrical Manufacturers Association, Learn how and when to remove this template message, "Understanding IP rating for smartphones – What do the numbers mean", example of IP ratings used in marine electronics,, Short description is different from Wikidata, Articles with unsourced statements from July 2016, Articles needing additional references from July 2019, All articles needing additional references, Creative Commons Attribution-ShareAlike License. The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Test duration: 10 minutes A device that is compliant with IPX7 (covering immersion in water) is not necessarily compliant with IPX5 or IPX6 (covering exposure to water jets). A vacuum must be applied. The nozzle is held 10–15 cm from the tested device at angles of 0°, 30°, 60° and 90° for 30 seconds each. Dripping water (vertically falling drops) shall have no harmful effect on the specimen when mounted in an upright position onto a turntable and rotated at 1 RPM. )—but it also finds use in other areas, such as food processing machinery and car wash systems. See the frequently asked questions. This test is identified as IPx9 in IEC 60529. See all of the docs on one page or check out the FAQ. in each of 4 angles (2 min. To protect your source code, treat it like intellectual property. Test b) is conducted (with shield in place) for 5 minutes minimum. Offline mode is a huge must for this project, so there's a lot of code I simply can't port to the server. The specific requirements for the test nozzle are shown in figures 7, 8, & 9 of IEC (or EN) 60529. Published: July 12th, 2011 - Scott Bell, Aly Dossa and Timothy M. Smith. Pressure: 50–150 kPa (7.3–21.8 psi), For an oscillating tube: The original documents are available for purchase, and have important and specific requirements that cannot be fully reprinted due to copyright restrictions. IP22 or IP2X are typical minimum requirements for the design of electrical accessories for indoor use. Test duration: 1 minute per square meter for at least 3 minutes. minimum). Unlike in native applications, our source code isn't compiled and is therefore open to everybody. Protect your web app with the most advanced JavaScript in-app protection technology, through polymorphic obfuscation, code locks, and self-defensive capabilities. [7] Enclosures conforming with ISO 20653:2013 must not only be dust-tight (IP6X), but also able to withstand high-pressure and steam cleaning. There are some less than honest people who want to sell you software to quickly and conveniently "protect" your source code. There are no hyphens in a standard IP code. A device that meets both tests is indicated by listing both tests separated by a slash, e.g. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Get Cross-platform Desktop Application Development: Electron, Node, NW.js, and React now with O’Reilly online learning. The equivalent European standard is EN 60529. The test device sits on a turntable that completes a rotation once every 12 seconds (5 rpm). Test duration of up to 8 hours based on airflow. Water projected by a nozzle (6.3 mm (0.25 in)) against enclosure from any direction shall have no harmful effects. Ratings between the two standards are not directly equivalent: NEMA ratings also require additional product features and tests (such as functionality under icing conditions, enclosures for hazardous areas, knock-outs for cable connections and others) not addressed by IP ratings. X means there is no data available to specify a protection rating with regard to this criterion. The OpenJS Foundation | Terms of It was superseded by ISO 20653:2013 Road Vehicles-Degrees of protection (IP code),[8] and complemented by the addition of a level 9 water ingress testing to IEC 60529, which includes essentially the same spray test as IP69K, but also includes, in Figure 10 of the standard, a drawing for a test fixture designed to verify the correct water pressure. The IP Code, or Ingress Protection Code[1], IEC standard 60529, sometimes interpreted as International Protection Code, classifies and rates the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact, and water. The following table outlines which IEC 60529 IP code each respective NEMA rating meets.